- FOUR SPIKED CLEANING CYLINDERS
- FIVE ADJUSTABLE CLEANING GRIDS
- SEGMENTED HEADS FOR CYLINDER REMOVAL
- POLYCARBONATE GUARD WINDOWS
- POLYCARBONATE LINT SLIDE COVER
Shown mounted over the Bajaj 161 Saw gin
with metal guards and Polycarbonale Windows
Touch Screen Control
The 2000 extractor/feeder is the economical design for fine trash removal and single locking of seed cotton fed into a gin stand. The 2000 extractor/feeder has shown excellent feeding and trash removal in field tests and in cotton High Volume Instrument testing. The model 2000’s one piece unit design will fit under most existing conveyors and in the same mounting footprint as most gin stand models. Replacement of your old feeder or any new installation with the 2000 extractor/ feeder will ensure the most economical way to feed your gin stand.
A touch screen control panel, mounted on the feeder, is used for display and changing PLC
control parameters. This panel contains several touch screen displays to control every aspect of 2000 EXTRACTOR / FEEDER BAJAJ MODEL BAJAJ STEEL INDUSTRIES LTD. S I N C E 1 8 3 2 IN COLLABORATION WITH , USA Shown mounted over the Bajaj 161 Saw gin with metal guards and Polycarbonale Windows FOUR SPIKED CLEANING CYLINDERS FIVE ADJUSTABLE CLEANING GRIDS SEGMENTED HEADS FOR CYLINDER REMOVAL POLYCARBONATE GUARD WINDOWS POLYCARBONATE LINT SLIDE COVER the ginning operation. A touch screen display. with adjustable setpoints, controls capacity of ginning based upon current load on the gin motor, An AC inverter drives the 3/4 hp feed motor for ease of control and operation, The gin and feeder operations are synchronized to prevent over feeding or under feeding. Motion detectors on the feeder and lint cleaner auto¬matically stop the ginning operation if the cotton flow is interrupted. *not included
As seed cotton enters the 200, feeder through two 6 vane feed rollers, it is first exposed to four spiked cleaning cylinders. The cotton is passed over the top of these cylinders and is then conveyed between them and the inclined grid section which allows for improved fine trash removal and single locking.
Once through the inclined grid two section, cotton is carried to two 6-1/2” channel saw cylinders, one of which functions as a reclaimer. The flow of cotton through a combination of brushes, a control bar, and adjustable grid sections allows tor hull, stick. and fine trash removal and enhances the opening of seed cotton locks for improved ginning. A saw dotter cylinder improves single locking and transfers the seed cotton from the cleaning cylinders to the feeder apron and into the gin.
TECHNICAL SPECIFICATIONS
| Model | |
|---|---|
| Feeder Motor (not included with machlne)….15 HP, 1800 RPM (60 cycle) | 15 HP, 1500 RPM (50 cycle) |
| or no motor used when driven | |
| from the Gin Saw Shaft | |
| Feed Roller Motor | 3/4 HP, 1800 RPM, 230/460 Volt, |
| 3-phase 60Hz TEFC Frame | |
| 56C (wire for 230 volt) | |
| Four Spiked Cylinders | 11” diameter (279.4 mm) |
| Two Channel Saw Cylinders | 16-1/2” diameter (419.1 mm) |
| One Saw Dotter Cylinder | 11-5/8” diameter (295.2 mm) |
| Two Feed Cylinders | 5-3/4” diameter (146 mm) |
| Model | |
|---|---|
| Dimensions | |
| Length: | |
| Inside | 96” (2438 mm) |
| Overall with covers | 124-1/2” (3162 mm) |
| Height : | |
| Cover top to bottom | 6’ 3-7/8” (1952.6 mm) |
| Top of cover to bottom of head | 9’ 1/4” (2749.5 mm) |
| Width : | |
| Front of touch screen to back | 7’ 7/8” (2155.8 mm) |
| Weight : | |
| Approximate (without guards) | 7,340 lbs (3329.4 kg) |