ENQUIRY FOR GINNING & PRESSING PLANT MACHINERY
Capacity requirement per HOUR in terms of lint or seed cotton or number of bales.
Preferred weight of Each Bale (in kgs. of Lint)
48" x 18"
42" x 21"
54" x 21"
What Type Bale Press is required
Up-packing (normally having 24 feet deep pit)
Down-packing (everything above ground level, hence extra height of building required)
The number of hours, to be worked everyday.
The expected number of working days per season.
Percentage out-turn expected for variety of cotton to be used, which is normally ranging between 35-40%.
Less than 30%
More than 35%
How will the Raw Cotton to be delivered to the plant?
In bulk by trucks or bullock-carts
Open in Trucks
Module / Seed Cotton Bales etc.
Raw Cotton Storage
Bags opened at Mixing Floor
Is a layout / sketch of land available
If yes, please provide copy.
Is there existing setup of Ginning Plant
If yes, please provide a drawing or sketch
What is the approx. moisture content of seed cotton when received ?
Less than 6%
More than 8%
(please specify approx. percentage)
Cotton Picking Method
What is Trash percentage in Seed Cotton
Which Technology you will prefer for ginning
What is the average length of fibre for Ginning
Between 20-27 mm
above 37 mm
Micronaire Range of Cotton to be ginned.
3 to 3.5%
3.5 to 4%
4 to 4.5%
above 4.5% (Please specify)
Strength in terms of G Tex. (if available)
Country of Plant Installation
Preferred Sea Port of Destination
Electrical Voltage available in the country of use.
380 V, 50 Hz
415 V, 50 Hz
"The Recommended moisture content at ginning point is around 8% and trash below 5% of size below 5 mm. Necessary drying & cleaning recommended if seed cotton having higher than this, approximate moisture percentage and trash contents are important inforamtion."
Disclaimer | Last Update: May 4th, 2012
Copyright @ 2015 Bajaj Group of Companies.
Prattville Time, US
IST Time, India